Premium S2 Steel
Tough Outside,
Strong Inside
Chrome Vanadium Steel
Exceptional
Performance
Fast & Easy Placement
Chamfered
Ends
Easy Identification
Large
Stamped Sizing
Description
The Stubby XZN/Triple Square bits in this set are made from heat-treated S2 steel alloy to withstand long-term use, the sockets are composed of Chrome-Vanadium to provide optimal strength and durability. The pieces also have a chrome plating to prevent rusting and corrosion. This set comes with a convenient blow-molded storage box for portability and protection. These are perfect for use with breaker bars, torque wrenches and ratchets (not for use with impact tools). They are compatible with most European vehicles. This set meets and exceeds ANSI standards and comes with a lifetime replacement guarantee.
ASME
Meets and exceeds ASME B107.110 standards.
Lifetime Guarantee
We believe in our products enough to back them up with a lifetime warranty to give you more peace of mind about your purchase.
Technical Data
Technical Data
Part Number | Description | L (in.) | W (in.) | wt (lbs.) |
---|---|---|---|---|
CP30350 | 10-Piece Stubby XZN Bit Sockets Set, Metric | 13.00 | 9.80 | 5.91 |
XZN | 1/4" Dr.: M4, M5, M6 3/8" Dr.: M8, M9, M10, M12 | |||
XZN Tamper | 1/2" Dr.: MT14, MT16, MT18 |
Part Number | Drive | Size | D1 (in.) | D2 (in.) | L (in.) | S (in.) | wt. (lbs.) |
---|---|---|---|---|---|---|---|
CP30351 | 1/4 | M4 | 0.13 | 0.46 | 1.26 | 0.51 | 0.01 |
CP30352 | 1/4 | M5 | 0.18 | 0.46 | 1.26 | 0.51 | 0.01 |
CP30353 | 1/4 | M6 | 0.22 | 0.46 | 1.26 | 0.51 | 0.01 |
CP30354 | 3/8 | M8 | 0.27 | 0.7 | 1.49 | 0.47 | 0.05 |
CP30355 | 3/8 | M9 | 0.35 | 0.7 | 1.49 | 0.47 | 0.05 |
CP30356 | 3/8 | M10 | 0.36 | 0.7 | 1.49 | 0.47 | 0.07 |
CP30357 | 3/8 | M12 | 0.43 | 0.7 | 1.49 | 0.47 | 0.08 |
CP30358 | 1/2 | MT14 | 0.5 | 0.93 | 1.97 | 0.5 | 0.22 |
CP30359 | 1/2 | MT16 | 0.6 | 1.01 | 1.97 | 0.5 | 0.28 |
CP30360 | 1/2 | MT18 | 0.64 | 1.09 | 1.97 | 0.5 | 0.33 |
Davion –
The sizes you get and the price is just about unbeatable, and the quality is very nice. In my opinion and have withheld being used on my Milwaukee & Snap On Impacts and fit very well in fasteners
ryan.johnston.86 (verified owner) –
I bought a cheap set of these off amazon (not really any cheaper than these and not nearly the quality). I didn’t think that I’d use these that much, but I quickly found out the tolerance son the cheap set were off enough to strip out a bolt. I immediately bought the capri tools set and bolt the bolt out with what was left. Tolerances matter!