Power tools are great for loosening factory-installed fasteners too tight to turn with your bare hands. They’re also perfect for installing fasteners that stay in place, so you don’t have to worry about a loose screw ruining your repair later on. However, power tools can be harder to use in tight spaces. You might find yourself scraping your knuckles or having to bend into an uncomfortable position just to use them.
If this sounds like you, our new Palm Twin Palm Impact Wrench may be the power tool you’ve been missing.
What Is the Palm Twin Impact Wrench?
The Palm Twin Impact Wrench is a compact power tool that lets DIY enthusiasts and professionals alike loosen and fasten hard-to-reach screws with ease. Its twin-hammer design makes this impact wrench more durable than single-hammer models, making it ideal if you plan on using it for multiple projects.
The twin hammer also works with less vibration than a single-hammer counterpart. If you’re working on projects that require precision, this impact wrench is a good tool. Our Palm Twin Impact Wrench works well on construction projects and when working on engine parts such as brake calipers or shock absorbers, for example.
How Does an Impact Wrench Work?
Impact wrenches work using compressed air or electricity as a power source to apply twisting motions in short bursts. The twin-hammer model uses a cage driven by a motor that rotates and causes opposing twin hammers to apply a force that loosens screws and other fasteners.
Since this type of impact wrench uses two hammers rather than one, they offer more power. You can use them on rusted fasteners and other screws that are typically difficult to loosen.
Why Not Use a Single Hammer Impact Wrench?
Impact wrenches use various motors to accomplish different tasks. The single hammer and the twin hammer both work by storing energy in a cage and distributing it using a blow to the output shaft, or a “hammer.” These tools offer more torque than a pulse tool.
Since the single hammer impact wrench only delivers one “blow” at a time, it doesn’t offer the same amount of torque as the twin hammer design. Single hammer tools are often smaller and more lightweight, which makes them good for working in small spaces. However, since they don’t pack as much power, you might have a harder time loosening super-tight screws.
How Do I Use the Palm Twin Impact Wrench?
Using the Palm Twin Impact Wrench properly will ensure a long life and multiple repairs. Here is how to use it.
Step 1: Prep the Air Supply
Make sure your trigger is in the off position. Next, check your air supply and make sure it is at 90psi. Check the hoses and other parts for damage before connecting the air supply to your wrench.
Drain the air tank before hooking up the air supply. If there is any water left in the line, it could damage your impact wrench.
Step 2: Check Your Couplings
Check the couplings on your air supply to make sure they will fit with your impact wrench. Use recommended accessories such as a rotary joint to ensure a tight fit. The Palm Twin Impact Wrench comes with a coupler plug and an air connection unit.
Step 3: Connect Your Hose to the Air Supply
Once you’ve checked that your air supply is clean and free of water and that you have the proper couplings, connect your air supply to the impact wrench as shown in your user manual.
Step 4: You’re Ready to Go
When you have everything in place, turn on the wrench. To loosen or tighten a screw, place the socket over the screw and pull down on the trigger. Change direction using the switch at the top of the tool. Do not use any additional force on a fastener that’s too tight.
What Are the Key Features of a Palm Twin Impact Wrench?
The Capri Tools Palm Twin Impact Wrench offers multiple features that will soon make it one of your favorites.
1/2″ Twin Hammer Mechanism
The sold square twin-hammer mechanism makes the Palm Twin Impact Wrench ultra-durable. It also reduces vibration when using the tool, allowing you to focus on the task at hand and not worry about dropping screws.
Easy-Grip Handle With Trigger
With an easy-grip handle built into the head, you can complete projects with one hand while positioning the wrench. Once you have the tool in place, simply push down on the trigger in the handle to activate the motor.
Performance Features
This impact wrench features a cold-insulated handle to keep it working on cold days. You don’t have to wait for the garage to heat up before getting started on your projects for the day. Additionally, exhaust air also flows down through the handles.
High Torque
With most impact wrenches, a smaller design usually gives you less power. Because of the twin hammer design, the Palm Twin Impact Wrench offers a maximum tightening torque of 368 foot-pounds and a maximum loosening torque of 408 foot-pounds.
Lightweight, Efficient Design
Because of its smart design, this tool is lightweight, clocking in at a little over 2 pounds. You can easily operate it with a single hand during a long project without it weighing you down. It is also very compact, which allows you to maneuver into hard-to-reach areas.
This tool is about 5.5 inches tall, which helps it fit securely into the palm of your hand. This compact design also gives you the flexibility to work on engine parts and other projects in which screws and other fasteners are hard to access.
How Do You Care for an Impact Wrench?
Although our tools are built to last, you can extend their lives by caring for them properly. While the Palm Twin Impact Wrench is powered by an air compressor, it needs oil to lubricate the motor and keep all the components running properly.
We recommend oiling the motor once daily if you use the tool every day. If you’re not using it that often, make sure to oil the motor before using it. Oil your tools using our recommended air tool oil. In a well-ventilated area, pour the oil into the wrench’s inlet, turn the tool on, and pull the trigger a few times.
You should also clean your impact wrench after each use to keep it from corroding. Store it in a dry, enclosed area to protect your impact wrench from the elements.
Finally, make sure you regularly inspect and clean your air supply before attaching it to this impact wrench. Water and other contaminants from your air tanks could end up in the motor, corroding the hammers and impacting the wrench’s performance.
The Best Twin Hammer Impact Wrench for Your Shop
Offering a lightweight and compact design that packs a lot of power, the Palm Twin Impact Wrench is just what you need for your complex projects. From construction to automotive repairs, this impact wrench can handle the tightest screws with ease.
You can easily maneuver it with one hand, freeing your other hand up to hold a light or catch fasteners if they slip out. High-quality construction makes this durable impact wrench your go-to for years to come. Caring for and storing it properly will keep it running like new for the long haul.
At Capri Tools, you can find all the power tools you need to keep your shop running smoothly. Our tools also come with a lifetime warranty.