100-Tooth Flex-Head Ratcheting Combination Wrenches, Metric

(1 customer review)

$14.99$19.99

100-Tooth Flex-Head Ratcheting Combination Wrenches, Metric

$14.99$19.99

-

Building on top of our popular 100-tooth ratcheting wrenches, the flex-head tilts up to 180 degrees for further access to fasteners. With just 3.6 degrees of swing arc, they will make your job a whole lot easier. Our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship. Its unparalleled smooth ratcheting mechanism makes it a joy to use. All of these components are engineered to fit in a slim profile to make these the go-to wrench for pros.

(1 customer review)
Clear

Earn up to 40 Star Rewards.

This item ships FREE

  • Order yours before 1:30pm (PST) for same day dispatch

Description

6-Point Anti-Slip Groove

Open end features 6-point anti-slip groove that grips on the bolt and prevents slippage while you work. The open end is tipped at a 15-degree angle. Useful especially in tight spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again

True Single-Pawl 100-Tooth Gear

Our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship. Its unparalleled smooth ratcheting mechanism makes it a joy to use.

12-Point WaveDrive (TM)

Achieved through our expert engineering & precise craftsmanship, our unparalleled true 100-tooth ratcheting wrench gear gives you just 3.6 degrees of swing arc with an ultra smooth ratcheting mechanism that’s a joy to use.

Two set in both Imperial and Metric system

Metric:

10 • 12 • 13 • 14 • 15 • 17 • 19 mm

SAE
5/16″ • 3/8″ • 7/16″ • 1/2″ • 9/16″ • 5/8″ • 11/16″ • 3/4″

Description

Building on top of our popular 100-tooth ratcheting wrenches, the flex-head tilts up to 180 degrees for further access to fasteners. With just 3.6 degrees of swing arc, they will make your job a whole lot easier. Our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship. Its unparalleled smooth ratcheting mechanism makes it a joy to use. All of these components are engineered to fit in a slim profile to make these the go-to wrench for pros.

Technical Data

100-Tooth Ratcheting Wrench Set – Metric

Model No. l (in.)w (in.) wt (lbs)
CP11580RK7-Piece, Metric Flex Ratcheting Wrench Set15.759.763.63
10 • 12 • 13 • 14 • 15 • 17 • 19 mm

100-Tooth Ratcheting Wrenches

Model No.Size (mm)l (in.)w1 (in.) h1 (in.) w2 (in.) h2 (in.) wt (lbs)
CP1154085.320.690.30.670.180.11
CP1154196.220.820.30.830.230.15
CP11542106.220.820.30.830.230.15
CP11543116.870.920.350.990.240.22
CP11544126.870.920.350.990.240.22
CP11545137.280.980.351.080.240.25
CP11546147.61.080.361.160.260.31
CP11547158.491.20.421.320.300.43
CP11548168.491.20.421.320.300.43
CP11549179.091.260.421.380.310.48
CP11550189.81.330.431.540.330.55
CP11551199.81.330.431.540.330.61

Additional information

Size

8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm

1 review for 100-Tooth Flex-Head Ratcheting Combination Wrenches, Metric

  1. Al

    I ordered several individual flex head wenches (10,12,13,14,17mm) because my harbor freight wrenches would literally fall apart while I was using them! So far may Capri flex head wrenches are holding up and performing flawlessly. Looking forward to purchasing a complete SAE set in the future.

Add a review