Here’s a quick, six step, guide on how to change bits and operate the Capri Tools 1/2″ Drive Impact Screwdriver. A downloadable PDF of the user manual is also available at the end of the guide.
Step 1:
Install the socket adapter on the impact screwdriver.
Step 2:
Set the screwdriver turn direction by following the engraved L and R markings on the driver. Push the driver towards the handle until you are able to turn the driver 45° in either direction.
Step 3:
With the driver pushed in towards the handle, turn the driver toward R for clockwise turn and turn the driver toward L for counterclockwise turn. Release the driver to lock the turn direction in place.
Step 4:
Place a screwdriver bit into the hex socket.
Step 5:
Hammer the back end of the impact screwdriver to fasten or loosen screws.
Step 6:
Remove the bit before changing the screwdriver direction.